Solutions by Industry

Choose by the material under test and the type of loading: metal structural parts usually call for an electronic or hydraulic universal machine (tension, compression, bending), while rubber seals use a low-capacity electronic machine with the right grips. We recommend the suitable model and fixtures based on your routine tests, capacity and standards (GB/T, ISO, ASTM), so you don’t overpay for a range you won’t use.

For metal parts and hard plastics we recommend a fiber laser marker — permanent, consumable-free, and able to mark QR codes, VINs and batch numbers. When inline on-the-fly coding is needed, add a laser coder integrated with PLC/MES. We provide selection, line integration and vision-positioning solutions.

We provide full-line equipment from cutting and skiving to crimping and pressure testing, plus smart crimpers, with crimping range and opening matched to your hose sizes. Factory pressure testing follows standards such as SAE J343, with integration to your line’s cycle time.

Choose screw diameter and L/D ratio by output and compound type: strainers purify by removing impurities, while extruders continuously form profiles and sheet. We recommend the right configuration based on your output targets, compound types and temperature-control needs, and can integrate it into your line.

A typical reclaimed-rubber line covers cracking/shredding, desulfurization, kneading/refining and forming. We supply open mills and complete reclaimed-rubber refining lines, customized to your space and capacity for continuous, clean production.

Tensile strength, elongation at break and similar tests use an electronic universal machine with dedicated rubber grips and an extensometer, compliant with GB/T 528, ISO 37 and similar standards. We configure capacity and accessories to your test items.

First fix the maximum test force and accuracy class: Class 0.5 for R&D and accreditation, Class 1 for routine QC; then add grips and an extensometer by specimen type. We provide a complete configuration recommendation based on your routine standards (ISO 7500-1, ISO 6892, ASTM E8, GB/T 228, etc.).

Yes. Pendulum impact testers (with optional low-temperature chamber), wood-based panel universal machines, asphalt mixture testers and other dedicated machines can all be supplied from established sources, selected per the relevant procedures (GB/T 229, GB/T 17657, JTG E20, etc.).

We provide installation and commissioning, measurement traceability and calibration coordination, helping you obtain CNAS or metrology-institute calibration so the equipment meets ISO 17025 and similar requirements.

A skiving machine + cutting machine + crimper + pressure tester make a complete line. We provide integrated packages and layout recommendations, with crimping range, opening and force matched to your main hose sizes.

Smart models (such as RFX) offer data logging, multi-mode control and higher precision — ideal for high-end manufacturing and traceability needs. Standard models (FX series) are cost-effective for routine volume work. We recommend based on output, precision and traceability requirements.

Use a hose pressure tester for proof and burst testing; saponified fluid can serve as the medium and also clean the hose, in line with standards such as SAE J343. For high-pressure hoses, we recommend a high-range tester for certification testing.

We recommend a disc-type crimper (such as the DX-60P): disc-locking, dies moving radially only, with a fast cycle and high precision — ideal for high-precision crimping of small-diameter hoses in aerospace, electronics and similar fields.

Precision metal parts use a fiber laser; heat-sensitive materials such as PCBs, ceramics, glass and medical devices use UV cold processing with minimal heat impact and micron-level precision; highly reflective metals like copper, gold and silver can use a green laser. We select by material and required contrast.

Steel strand, prestressing wire and anchorages use steel-strand testing machines and static-load anchorage testers for tensile, breaking and anchorage-performance tests per GB/T 21839, GB/T 14370 and similar standards. We select by capacity and gripping needs.

High-pressure hydraulic hose assemblies use a full crimping line with a high-range pressure tester for proof-pressure certification; equipment nameplates and component identification use laser marking or coding — permanent, tamper-proof and traceable.

A laser cleaning machine removes rust, paint and oxide layers from metal without damage — no abrasives, no chemical consumables and environmentally friendly — ideal for maintaining and reusing infrastructure components.